Metalworking
|
Blending operation on
fabricated stainless part.
|
Satin finishing a stainless part.
|
|
The Wolfhead is ideal for:
-
Satin finishing of aluminum extrusions and stainless steel
trim
-
Deburring sprockets, gears, and other parts
-
Blending operations and surface preparation prior to
painting
Compared to other polishing wheels, the Wolfhead is more aggressive
than nylon wheels and less
aggressive than flap wheels.
Other materials:
The Wolfhead is used on fiberglass for sanding:
-
Helmets
-
Automotive Parts
-
Marine Parts
|
|
Woodworking
|
Sanding the intricate surface of
a chair leg.
|
Sanding mouldings as they
exit the moulder.
|
|
Better, Easier, and Faster:
The Wolfhead sands all classes of shapes and surfaces:
-
Mouldings
-
Intricate Carvings
-
Furniture Parts
-
Assemblies
The Wolfhead is used for:
-
Sanding out rough areas and raised grain
-
Sanding machined surfaces of wood and other fibrous
materials
-
Sealer sanding
|
|
Follow The Contour
The Wolfhead Sanding Wheel lowers cost and reduces
rejection rates associated with sanding mouldings and shaped
wooden parts. The Wolfhead provides consistent finishes to
both flat and intricate surfaces. Cushioning bristles work the
abrasive strips into and around:
-
Corners
-
Fluted surfaces
-
Hollow surfaces
-
Small openings
|
Easy To Load
The abrasive is stored in the wheel. As it wears, fresh
abrasive is released. Installing new abrasive is done easily
quickly with packaged coated abrasive available in a
variety of grits, bonds, and shreds from regular sources.
|
|
|
Specifications
|
32 Brush
|
32 Brush
Standard Trim
2" Width
|
32 Brush
Long Trim
2" Width
|
Model
Number and
Abrasive Width
|
Length
Through Bore
Dimension "A"
|
Bore
Size
|
Recommended
Standard
Brushes
|
Speed
(RPM)
Long Trim
Brushes
|
Maximum
Standard
Brushes
|
Speed
(RPM)
Long Trim
Brushes
|
W1001-1"
(25.4)
|
2
3/4" (70)
|
3/4"
(19) - 1 1/2" (38)
|
1200
|
1200
|
1800
|
1800
|
W1002-2"
(50.8)
|
4
1/2" (114)
|
3/4"
(19) - 1 1/2" (38) |
1200
|
1200
|
1800
|
1800
|
W1004-4"
(101.6)
|
6
1/2" (165)
|
1"
(25) - 1 1/2" (38)
|
1200
|
1200
|
1800
|
1800
|
W1006-6"
(152.4)
|
8
1/2" (216)
|
1
1/4" (32) - 1 1/2" (38) |
1200
|
1200
|
1800
|
1800
|
|
16 Brush
|
16 Brush
Standard Trim
2" Width
|
16 Brush
Long Trim
2" Width
|
Model
Number and
Abrasive Width
|
Length
Through Bore
Dimension "A"
|
Bore
Size
|
Recommended
Standard
Brushes
|
Speed
(RPM)
Long Trim
Brushes
|
Maximum
Standard
Brushes
|
Speed
(RPM)
Long Trim
Brushes
|
WH-1041-1"
(25.4)
|
2
3/4" (70)
|
5/8"
(16) - 1 1/4" (32)
|
1800
|
1800
|
3000
|
3000
|
WH-1042-2"
(50.8)
|
4
1/2" (114)
|
3/4"
(19) - 1 1/4" (32) |
1800
|
1800
|
3000
|
3000
|
WH-1044-4"
(101.6)
|
6
1/2" (165)
|
3/4"
(19) - 1 1/4" (32) |
1800
|
1800
|
3000
|
3000
|
WH-1046-6"
(152.4)
|
8
1/2" (216)
|
3/4"
(19) - 1 1/4" (32) |
1800
|
1800
|
3000
|
3000
|
|
|
12 Brush
|
Note:
The 12 brush head does not have a through bore; therefore, it cannot be
mounted in the spindle
of a buffing lathe or on a motor as is common practice with the larger
wheels. Instead, a choice of mounting
adapters is available for mounting on the threaded shaft of a portable
lathe or in a chuck.
A 1/2" adapter is available for chuck mounting. Female adapters
with the following threaded hole sizes
are available for mounting on tools that have a threaded shaft:
-
5/8"-11
-
1/2"-13
-
1/2"-20
-
3/8"-24
A 1/4" blank adapter
is available for requirements other than those listed. Metric
adapters are also available.
|
Model
Number and
Abrasive Width
|
Length
Through Bore
|
Bore
Size
|
Recommended
Standard
Brushes
|
Speed
(RPM)
Long Trim
Brushes
|
Maximum
Standard
Brushes
|
Speed
(RPM)
Long Trim
Brushes
|
SH-1061-1"
(25.4)
|
N/A
|
N/A
|
2500-3200
|
2500
|
3500
|
2500
|
SH-1060-1
1/2" (38.1)
|
N/A
|
N/A |
2500-3200
|
2500
|
3500
|
2500
|
SH-1062-2"
(50.8)
|
N/A
|
N/A |
2500-3200
|
2500
|
3500
|
2500
|
|
|
|
Standard Trim and Long Trim Brushes
Standard trim brushes have a bristle length of 1
1/2", and are suitable for most applications. Long trim
brushes have a bristle length of 3 1/2", and are available for sanding
parts that require a longer brush
to reach deep recessed areas - and for applications requiring a softer
touch. The long trim brushes
increase the diameter of the wheel by 4"; therefore, the speed of the
wheel should be reduced to take
advantage of the softer brushes.
|
Click on image to view/download complete Wolfhead brochure
|
